Germany Peppol ID vs Leitweg-ID: Which ID Goes Where
Germany Peppol ID explained: how 0204, 9930 and 0088 IDs work, where the Leitweg-ID goes in BT-10 and BT-49, with a worked invoice to a federal authority.
Key takeaways
- A Peppol ID addresses a participant on the Peppol network; a Leitweg-ID addresses an invoice recipient inside the German public administration and goes in BT-10.
- For authorities on the federal OZG-RE platform, the Peppol receiver ID is 0204: plus the Leitweg-ID; 0204 is its ISO/IEC 6523 code since 30 September 2019.
- The 0204: prefix never goes into BT-10; the OZG-RE rejects invoices that lack the plain Leitweg-ID there.
- Senders use 9930: plus their German VAT ID or 0088: plus a GLN; companies do not get a Leitweg-ID.
- For state and municipal portals outside the OZG-RE, the Peppol ID can differ from the Leitweg-ID, so ask the contracting authority.
On this page
A Germany Peppol ID is a prefix plus an existing identifier: 0204 plus the Leitweg-ID for authorities on the federal OZG-RE platform, 9930 plus the German VAT ID or 0088 plus a GLN for businesses. The Leitweg-ID itself also goes into the invoice, in field BT-10, without the prefix. The Peppol ID belongs in the transport envelope only.
This guide is for foreign suppliers, ERP teams and service providers who set up invoicing to German public bodies. It maps every identifier to the field where it belongs and walks through an invoice to a federal test authority.
Peppol ID or Leitweg-ID: which one do you need?
| Situation | Leitweg-ID | Peppol ID |
|---|---|---|
| XRechnung to a federal authority by upload or e-mail | yes, in BT-10 | no |
| XRechnung to a federal authority via Peppol | yes, in BT-10 | yes: receiver 0204:Leitweg-ID, sender e.g. 9930:VAT ID |
| Invoice to a state or municipal authority via Peppol | yes, in BT-10 | yes, as stated by the authority |
| XRechnung to a German business by e-mail | no, BT-10 holds the customer's own reference | no |
| Invoice to a business that requires Peppol in the contract | no | yes, the customer provides it |
In short: the Leitweg-ID depends on the recipient being a public body. The Peppol ID depends on the channel being Peppol. Sometimes you need both.
What are the two identifiers?
Leitweg-ID: A Leitweg-ID (buyer reference, BT-10) is the address of a German public-sector invoice recipient. The receiving platform reads it from BT-10 and routes the invoice to the right office. Its format and check digit are defined in the Leitweg-ID format specification 2.0.2 (opens in a new tab) of the Coordination Office for IT Standards (KoSIT), dated 28 July 2021. The structure is explained in What Is a Leitweg-ID?.
Peppol ID: A Peppol participant ID uniquely identifies a sender or receiver on the Peppol network. It has a four-digit scheme prefix, a colon and an identifier. The prefix tells the network which numbering system the identifier comes from.
The link between the two is a registration under ISO/IEC 6523. According to the format specification, the KoSIT registered the Leitweg-ID as an identification scheme on 30 September 2019, with the International Code Designator (ICD) 0204. That is why a Leitweg-ID with 0204: in front works as a Peppol ID.
Side-by-side comparison
| Criterion | Leitweg-ID | Peppol ID |
|---|---|---|
| Purpose | routing inside the administration to the responsible office | delivery on the Peppol network to the right access point |
| Issued by | federal and state governments; for federal bodies the Central Federal Finance Service (Zentrales Finanzwesen des Bundes, ZFB) | nobody: it is an existing identifier plus a prefix |
| Who has one | public-sector invoice recipients only | every Peppol participant, sender or receiver |
| Format | coarse address, optional fine address, check digit, e.g. 04011000-1234512345-06 | prefix:identifier, e.g. 0204:04011000-1234512345-06 or 9930:DE123456789 |
| Location | inside the invoice, BT-10 buyer reference | in the technical envelope (Standard Business Document) of the Peppol message |
| Mandatory | for invoices to the federal government under § 5(1) no. 1 of the e-invoicing ordinance (E-RechV); BT-10 is required in every XRechnung by rule BR-DE-15 | only when you send or receive via Peppol |
| Check | check digit under ISO/IEC 7064 Mod 97-10 | receiver must be registered in an SMP to be found |
The FAQ of E-Rechnung des Bundes (opens in a new tab) states that Peppol IDs are not applied for. Receivers must be registered in a Service Metadata Publisher (SMP) so that senders can find them. A participant who only sends does not need an SMP entry.
Peppol ID schemes used in Germany
The federal Peppol channel page (opens in a new tab) lists three prefixes:
| Prefix | Identifier | Typical user | Example |
|---|---|---|---|
| 0204 | Leitweg-ID | authority receiving invoices via the OZG-RE | 0204:04011000-1234512345-06 |
| 9930 | German VAT ID (USt-IdNr.) | business sending invoices | 9930:DE123456789 |
| 0088 | Global Location Number (GLN) | business with a GLN | 0088: plus a 13-digit GLN |
The federal pages name only these schemes for Germany. If your company is established abroad and has no German VAT ID, ask your Peppol service provider which scheme it registers you under. Either way, you do not need a Leitweg-ID of your own. Leitweg-ID for companies explains why this also holds for B2B invoicing.
Three places, three jobs: BT-10, BT-49 and the envelope
In an XRechnung sent to a federal authority via Peppol, the Leitweg-ID can appear in up to three places. Each has its own job and its own notation.
| Place | Content | Notation | Rule |
|---|---|---|---|
BT-10 buyer reference (cbc:BuyerReference) | Leitweg-ID without prefix | 04011000-1234512345-06 | BR-DE-15: must be present |
BT-49 buyer electronic address (cbc:EndpointID) | an address with a scheme identifier, e.g. Leitweg-ID with schemeID 0204 or e-mail with schemeID EM | value without prefix, scheme in the schemeID attribute | PEPPOL-EN16931-R010: must be present; BR-63: needs a scheme identifier |
| Peppol envelope (SBD) | Peppol receiver ID | 0204:04011000-1234512345-06 | handled by the access point, not part of the invoice |
These rules come from the rule set that the KoSIT validator applies to XRechnung 3.0.2 (configuration 2026-08-31), and all three are at level "fatal". The scheme identifier in BT-49 must also be on the EAS code list (BR-CL-25); 0204, 9930, 0088 and EM are on it.
The OZG-RE pages do not prescribe a specific BT-49 value. Use what the contracting authority specifies. Without such an instruction, the Leitweg-ID with schemeID 0204 is a valid value, and so is an e-mail address of the invoicing office with schemeID EM.
BT-10 never carries the prefix
The federal site is explicit: the Peppol receiver ID goes into the Peppol document, while the e-invoice itself must contain the Leitweg-ID, or the OZG-RE rejects it. "0204:" in BT-10 is a common mistake when an ERP system uses one "customer ID" field for both.
Worked example: invoice to a federal authority via Peppol
Muster GmbH (VAT ID DE123456789) issues invoice RE-2026-0042 to the test recipient of the OZG-RE reference environment. The federal FAQ lists these test IDs:
- Leitweg-ID: 99661-WEBSERVICEOZG-28
- Peppol receiver ID: 0204:99661-WEBSERVICEOZG-28
This is where the identifiers go (UBL excerpt, abridged; we did not send this file to the OZG-RE):
<cbc:BuyerReference>99661-WEBSERVICEOZG-28</cbc:BuyerReference> <!-- BT-10 -->
<cac:AccountingSupplierParty>
<cac:Party>
<cbc:EndpointID schemeID="9930">DE123456789</cbc:EndpointID> <!-- BT-34 -->
</cac:Party>
</cac:AccountingSupplierParty>
<cac:AccountingCustomerParty>
<cac:Party>
<cbc:EndpointID schemeID="0204">99661-WEBSERVICEOZG-28</cbc:EndpointID> <!-- BT-49 -->
</cac:Party>
</cac:AccountingCustomerParty>
In the Peppol envelope, the sender's access point enters 0204:99661-WEBSERVICEOZG-28 as receiver and 9930:DE123456789 as sender. According to the FAQ, the invoice itself does not change: the Standard Business Document only wraps the XRechnung. In CII syntax the same values sit in ram:BuyerReference and in ram:URIUniversalCommunication/ram:URIID with a schemeID attribute. For the full list of required fields, see XRechnung mandatory fields.
Two points from the FAQ for the first send: test invoices go only to the reference environment and real invoices only to production. Peppol transmissions to the OZG-RE are currently limited to 100 MB. Registration and status messages are covered in Germany e-invoice portal.
States and municipalities: when the rule changes
The formula "Peppol ID = 0204: plus Leitweg-ID" applies, according to the FAQ, to the direct federal administration and to indirect federal bodies and cooperating states that are connected to the OZG-RE. For other states, the Peppol ID and the Leitweg-ID can differ.
The format specification also says the Peppol ID does not have to be identical to the Leitweg-ID. The receiver usually sends its Peppol ID to the supplier, for example when the contract is awarded. In practice:
- Federal authority on the OZG-RE: build the Peppol ID from 0204: and the Leitweg-ID.
- State or municipal authority: ask for the Peppol receiver ID; do not derive it.
- In both cases: put the Leitweg-ID from the order into BT-10 unchanged.
Whether Peppol is the right channel at all is covered in Is Peppol mandatory in Germany?.
Common mistakes
| Mistake | Symptom | Fix |
|---|---|---|
| "0204:" in BT-10 | OZG-RE rejects the invoice; Leitweg-ID treated as invalid | prefix only in the envelope and the schemeID attribute |
| BT-10 empty, Leitweg-ID only in BT-49 | error BR-DE-15 | add the Leitweg-ID to BT-10 as well |
| BT-49 missing | error PEPPOL-EN16931-R010 | add the buyer electronic address |
schemeID missing or not an EAS code | error BR-63 or BR-CL-25 | use a valid code such as 0204 or EM |
| State authority's Peppol ID derived from its Leitweg-ID | access point cannot find the receiver | ask the authority for its Peppol ID |
| Company looks for "its" Leitweg-ID to join Peppol | registration stalls | build the sender ID from 9930: plus the VAT ID, or ask your provider |
The fix for BR-DE-15 is on the BR-DE-15 page. Other rules are listed under XRechnung validation errors.
How to check the Leitweg-ID and the XRechnung with docutools.pro
docutools.pro does not send invoices over Peppol and does not check Peppol registrations. You can check the building blocks before handing the file to your access point:
- Check the Leitweg-ID. Open the Leitweg-ID validator and enter the ID without the prefix in the "Validate" tab, for example 99661-WEBSERVICEOZG-28. With "0204:" in front, the tool reports an error in the coarse address, which may contain digits only. The check of structure and check digit runs in your browser; it does not confirm that the ID is registered.
- Validate the XRechnung. Upload the XML file to the XRechnung validator. The file is sent to our server for the check, which works the way the KoSIT validator does (configuration 2026-08-31). If BT-10 or BT-49 is missing, BR-DE-15 or PEPPOL-EN16931-R010 appears as an error and the result reads "Not KoSIT-conformant". The free plan allows 2 uploads per day up to 500 KB; the Pro plan removes these limits.
- Compare the values. Check the extracted data against your order. The "Extracted data" table does not display the Leitweg-ID, so verify it in step 1.
More guides on portals, fields and versions are collected under XRechnung guides.
Sources
- E-Rechnung des Bundes: Peppol transmission channel (German) (opens in a new tab)
- E-Rechnung des Bundes: FAQ, sections Peppol and Leitweg-ID (German) (opens in a new tab)
- § 5 of the federal e-invoicing ordinance (E-RechV) (opens in a new tab)
- KoSIT: Leitweg-ID format specification 2.0.2, 28 July 2021, sections 1.3 to 1.5 (opens in a new tab)
- KoSIT: XRechnung validator configuration releases (opens in a new tab)
Last reviewed: November 2026
This article is general information, not tax or legal advice.
Tools for this article
- Leitweg-ID Validator & Check-Digit CalculatorValidate Leitweg-IDs and calculate ISO 7064 Mod 97-10 check digits.Open tool →
- XRechnung ViewerParse, validate & repair German e-invoices with GoBD-compliant audit trail.Open tool →
- KoSIT Error HubSearchable reference for all XRechnung validation error codes with fix guides.Open tool →
Frequently asked questions
How do I get a Peppol ID in Germany?
You do not apply for it. According to the federal e-invoicing website (E-Rechnung des Bundes), a Peppol ID is formed from an identifier you already have plus a four-digit prefix, for example 9930 plus a German VAT ID or 0088 plus a Global Location Number. To receive documents, you must also be registered in a Service Metadata Publisher (SMP), which your Peppol service provider usually handles.
How do I find the Peppol ID of a German authority?
For federal authorities on the OZG-RE platform, build it yourself: 0204, a colon, then the Leitweg-ID from your contract or purchase order, for example 0204:04011000-1234512345-06. The contracting authority gives you the Leitweg-ID. For state or municipal authorities with their own portals, the Peppol ID may differ, so ask the authority for its Peppol receiver ID.
Do I need a Peppol ID to invoice the German federal government?
Only if you send via Peppol. The OZG-RE also accepts e-invoices by e-mail, by upload and by manual web entry. In every channel you need the Leitweg-ID of the contracting authority in BT-10 of the XRechnung. Foreign suppliers working on German public contracts fall under the federal e-invoicing ordinance (E-RechV) in the same way as German suppliers.
Is a Leitweg-ID the same as a Peppol participant ID?
No. The Leitweg-ID is a routing code of the German public administration, defined by the KoSIT format specification. A Peppol participant ID is a network address made of a scheme prefix and an identifier. Because the Leitweg-ID is registered under ISO/IEC 6523 code 0204, the federal government uses 0204 plus the Leitweg-ID as the Peppol ID of its invoice recipients.